Overhaul of F-16 Check Valve

Description

The United States Air Force through Air Force Sustainment Center (AFSC), Tinker AFB 73145 is contemplating the Overhaul of the F-16 Check Valve. The contractor shall provide all labor, facilities, equipment and all material to accomplish overhaul. The work encompasses the disassembly cleaning, inspection, maintenance re-assembly, testing, and finishing actions required to restore the item to a completely serviceable condition in accordance with the solicitation requirements and all attachments. A firm fixed price Indefinite Delivery Indefinite Quantity (IDIQ) type contract is contemplated with one 5 year period of performance. The requirements set forth in this notice are defined per Purchase Request FD20302600572 as follows: Written response is required. Item 0001: Overhaul of F-16 Check Valve, NSN: 4820010533375RK, P/N: 2750037-101. 5 Year IDIQ Contract with Minimum 5 ea. / Maximum 20 ea. Item 0002: Over and Above (O&A). To be negotiated (TBN). Item 0003: Data (Not Separately Priced) NSN: 4820-01-053-3375RK Function: Used as a flow control valve for halon, which is installed in the fuel tank and used for suppressing a fire. Dimensions: 9.0000� h x 7.0000� w x 7.0000� l and weighs 4.0000 lbs. Material: Aluminum Alloy. Delivery: Deliver 1 unit(s) 10 ea. every 433 days After Receipt of Order (ARO). Early delivery is acceptable Ship To: DLA DISTRIBUTION DEPOT OKLAHOMA 3301 F AVE CEN REC BLDG 506 DR 22 TINKER AFB OK 73145-8000 USA Duration of Contract Period: 5 Year IDIQ Qualification Requirements: QUALIFICATION REQUIREMENTS APPLY. Interested vendors that have not been previously qualified for this acquisition must submit a Source Approval Request (SAR) package to the Source Development, Small Business Office at 405-739-7243. As prescribed in FAR 9.202(e), the contracting officer need not delay a proposed award in order to provide a potential offeror with an opportunity to demonstrate its ability to meet the standards specified for qualification. Part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from approved sources. In order to receive any technical data related to this acquisition during the pre-solicitation phase, offerors must send an email request to the Public Sales Office AFLCMC.LZP.PUBSALES@us.af.mil. Release of any data is subject to applicable data rights. The request shall be on company letterhead and include the applicable solicitation number, the specific data needed (including TO and/or drawing numbers), and a copy of the current, approved DD Form 2345. The form, including instructions for completing the form, is available at: http://www.dtic.mil/whs/directives/infomgt/forms/forminfo/forminfopage2220.html. The Government is not responsible for incomplete, misdirected, or untimely requests.** Some units of items listed in Section B may, upon disassembly and/or inspection, be determined to be beyond repairable limits specified in the Work Specification and/or Technical Orders. Any cost for work performed by the Contractor, prior to determination that such equipment is beyond repairable limits, shall be included in the unit price(s) of the listed item(s). Condemned units will not be counted as production. Export Control: N/A There is 1 approved source. IAW 762 Approved Sources, a sole source solicitation is contemplated for this requirement. The RMC is R4/D. The Government intends to issue solicitation on or about 29 May 2026 with a closing response date of 30 June 2026 and estimated award date of on or about 03 August 2026. This notice does not in itself represent the issuance of a formal request for proposal and is not intended to be taken as such. Based upon market research, the Government will not be using policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested parties may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice. All questions regarding this notice are to be submitted in writing via E-mail. All questions submitted to this office are subject to be posted in this notice along with the appropriate response(s). Vendor identities will not be disclosed. Prospective offerors must comply with all the requirements of the solicitation and any attachments thereto to be considered responsive. All offerors are to specify in their response whether they are a large business, small business, small disadvantaged business, 8(a) concern, women-owned small business, HUBZone small business, veteran-owned small business or service-disabled veteran-owned small business. Also offerors must specify whether they are a U.S. or foreign-owned firm. APPLICABLE TECHNICAL ORDERS Specific Technical Orders PART NUMBER REMANUFACTURE MANUAL/ TITLE/REVISION AND/OR OTHER TO NUMBER DIRECTIVES (AFTO FORM 252) 2750037-101 N/A N/A General Technical Orders TO NUMBER DATE TITLE 00-5-1 19 NOV 2024 AF TECHNICAL ORDER SYSTEM 00-5-3 20 JAN 2025 AF TECHNICAL ORDER LIFE CYCLE MANAGEMENT 00-25-260 10 MAY 2022 METHODS AND PROCEDURES MANUAL � UNIQUE IDENTIFICATION ASSET MARKING 00-35D-54 15 FEB 2024 USAF DEFICIENCY REPORTING, INVESTIGATION AND RESOLUTION OTHER PUBLICATIONS FOR INFORMATION PURPOSES ONLY NOTE: These publications are for information purposes only. Air Force Manuals DOCUMENT NUMBER DATE TITLE AFI 23-101 21 OCT 2020 AIR FORCE MATERIAL MANAGEMENT AFMAN 23-122 26 OCT 2020 MATERIEL MANAGEMENT PROCEDURES DoD/GSA/Air Force Forms FORM NUMBER TITLE AFMC FORM 158 PACKAGING REQUIREMENTS DD250 MATERIAL INSPECTION AND RECEIVING REPORT DD254 DOD CONTRACT SECURITY CLASSIFICATION SPECIFICATION DD1348-1A ISSUE RELEASE/RECEIPT DOCUMENT DD1423 CONTRACT DATA REQUIREMENTS LIST (CDRL) DD1574 SERVICEABLE TAG � MATERIEL DD1574-1 SERVICEABLE LABEL � MATERIEL DD1577-2 UNSERVICEABLE (REPAIRABLE) TAG � MATERIEL DD1577-3 UNSERVICEABLE (REPAIRABLE) LABEL � MATERIEL DD1577 UNSERVICEABLE (CONDEMNED) TAG � MATERIEL DD1577-1 UNSERVICEABLE (CONDEMNED) LABEL � MATERIEL DD1575 SUSPENDED TAG � MATERIEL DD1575-1 SUSPENDED LABEL � MATERIEL DD1694 REQUEST FOR VARIANCE (RFV) SF328 CERTIFICATE PERTAINING TO FOREIGN INTERESTS SF 364 REPORT OF DISCREPANCY SF 368 QUALITY DEFICIENCY REPORT Other Government Publications PUBLICATION NUMBER TITLE MIL-STD-130 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY NIST SP 800-53 Rev. 5 SECURITY AND PRIVACY CONTROLS FOR INFORMATION SYSTEMS AND ORGANIZATIONS NIST SP 800-61 Rev. 3 INCIDENT RESPONSE RECOMMENDATIONS AND CONSIDERATIONS FOR CYBERSECURITY RISK MANAGEMENT NIST SP 800-161 Rev. 1 CYBERSECURITY SUPPLY CHAIN RISK MANAGEMENT PRACTICES FOR SYSTEMS AND ORGANIZATIONS NIST SP 800-171 Rev. 3 PROTECTING CONTROLLED UNCLASSIFIED INFORMATION IN NONFEDERAL SYSTEMS AND ORGANIZATIONS CONTRACTOR DOCUMENTS PART NUMBER DRAWING NUMBER TITLE AND DATE N/A N/A N/A OMBUDSMAN (AUG 2005) (An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition). The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at 405-736-3273. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. Electronic procedures will be used for this solicitation. No telephone requests. Only written or emailed requests received directly from the requestor are acceptable.